Maps · Chapter 16

Contour Height Reader

A contour line joins points of equal height. Count the lines you cross and multiply by the interval to get the climb; close lines are steep, wide ones gentle.

Home › Calculators › Maps › Contour Height Reader

Opens on Chapter 16’s first worked example: from the 250 m line to Gray Knob’s 699 m top, with contours every 10 m: the lines 260 to 690, 44 of them, then 9 m more above the last.

1. Counting lines
2. A point between two lines
3. Spacing on the map
Enter your numbers, then press Work it out.

How it works

Lines above a start on a line: the first is one interval up, the last is the highest multiple of the interval below the end; the count is (last − first) ÷ interval + 1. The height of a point between two lines is the lower line plus its fraction of the way across times the interval. A climb is end minus start, or, counted on the map, lines crossed × interval plus whatever is left above the last line. Spacing: lines m mm apart on a 1:N map are m × N ÷ 1,000 meters apart on the ground, so the slope is interval ÷ that distance.

From the book, Chapter 16. From 250 m to 699 m: lines 260 to 690, 44 lines, 43 gaps, 9 m above the last. Halfway between 450 and 460 is 455 m; three tenths of the way, 453 m. Fern Junction (230 m) to Gray Knob (699 m): 469 m by subtraction; 46 lines crossed is 460 m, plus 9. At 1:25,000, lines 1 mm apart are 25 m apart on the ground: 10 ÷ 25 = 40%; 4 mm apart, 100 m: 10%. A 20% slope draws its lines 50 m, 2 mm, apart. Every chapter and its tool →

Numbers may use commas (25,000) and a scale may be typed as 1:25,000. The Thimble Hills, their map and every place on it are invented for the book. This tool does arithmetic only: it doesn’t know where you are and can’t tell you whether a walk is safe; check local information for any real place. Everything stays in your browser: no sign-up, nothing stored or sent.