Maps · Chapter 17

Slope Converter

Slope is rise ÷ run. Times 100 it’s the percent grade on a road sign; arctan turns it into degrees; 1 ÷ slope is the “1 in N” of older signs. 100% is 45°, not straight up.

Home › Calculators › Maps › Slope Converter

Opens on Chapter 17’s first worked example: a road sign’s 8%: 8 m up for every 100 m across, arctan(0.08) ≈ 4.57°, 1 in 12.5.

1. Rise and run
2. From the map
3. Walking distance against map distance
Enter your numbers, then press Work it out.

How it works

Slope = rise ÷ run, both in the same units, measured across the map (horizontally), not along the ground. Percent = slope × 100. Degrees = arctan(slope); a 100% slope is 45°, because then rise equals run. “1 in N” means N = run ÷ rise. From a map: the rise is the difference of two heights, the run is the map distance. The contour lines for a slope s at interval i are i ÷ s meters apart. Walking distance = √(run² + rise²): at 20% that’s only 2% more than the map distance.

From the book, Chapter 17. 8% → 4.57°. 1 in 8 is 12.5%, 7.13°. The Ridge Trail climbs 469 m in 2.06 km: 22.8%, 12.8°, with 10 m contours about 43.9 m (1.76 mm) apart on average. The steepest 200 m climbs 77 m: 38.5%, 21.1°. 1 km across at 20% is 1.02 km walked; at 40%, 1.08 km. Cormac’s 85 m in 1,200 m: 0.0708, 7.1%, 4.05°, about 1 in 14.1. Every chapter and its tool →

Numbers may use commas (25,000) and a scale may be typed as 1:25,000. The Thimble Hills, their map and every place on it are invented for the book. This tool does arithmetic only: it doesn’t know where you are and can’t tell you whether a walk is safe; check local information for any real place. Everything stays in your browser: no sign-up, nothing stored or sent.