Maps · Chapter 20

Walking Time Planner

Naismith’s rule: 5 km an hour on the map distance, plus 1 minute for every 10 m of climbing (or 3 miles an hour plus an hour for every 2,000 ft). It’s a minimum for a fit walker in good conditions, before stops.

Home › Calculators › Maps › Walking Time Planner

Opens on Chapter 20’s first worked example: the Ridge Trail, 2.06 km with 469 m of climb: 24.72 + 46.9 = 71.62 minutes, about 1 h 12 min.

1. Naismith
2. Miles and feet
3. Tobler’s curve
4. Your own speed, and pacing
Enter your numbers, then press Work it out.

How it works

Naismith (metric): minutes = km ÷ speed × 60 + climb ÷ 10, with speed 5 km/h by default, so 12 minutes a kilometer. Imperial: 3 miles an hour plus an hour for every 2,000 ft. Tobler (1993): speed = 6 × e^(−3.5 × |S + 0.05|) km/h with S the slope as a decimal, so about 5 km/h on the flat and fastest, 6 km/h, on a gentle 5% downhill. Better than either: time yourself on a known walk and use your own speed. Pacing: count a double pace each time one foot lands; distance = paces × 100 ÷ your paces per 100 m. Rules of thumb aren’t promises; add time for rests, rough ground and the slowest walker.

From the book, Chapter 20. Ridge Trail: 2.06 × 12 = 24.72 min + 469 ÷ 10 = 46.9 min = 71.62 ≈ 1 h 12 min. Cormac’s 6 miles and 1,800 ft: 2 h + 54 min = 2 h 54 min. Tobler: 5.04 km/h on the flat, 3.55 at 10% uphill, 6.00 at 5% down, 3.22 going down the Ridge Trail (38.4 min). Imogen walked 3.68 km in 52 min: 4.25 km/h, so the Ridge Trail takes her about 1 h 16 min. Rafi’s 62 double paces per 100 m: 400 paces ≈ 645 m. Every chapter and its tool →

Numbers may use commas (25,000) and a scale may be typed as 1:25,000. The Thimble Hills, their map and every place on it are invented for the book. This tool does arithmetic only: it doesn’t know where you are and can’t tell you whether a walk is safe; check local information for any real place. Everything stays in your browser: no sign-up, nothing stored or sent.